We have created this Thermacoil Installation Case Study page to enable you to see before and after images of a typical installation. Vauxhall Bridge Road, London, SW1V 2RD, PulsaCoil 3 Replacement Case Study is centered around a residential development comprising 78 high quality one, two and three bedroom flats that are located just off of Vincent Square in Westminster. Miss C is just one of the many customers that we work for in this area.
Vauxhall Bridge Road, London, SW1V 2RD, PulsaCoil 3 Replacement Case Study
Miss C first called The Plumbing Group Limited when she started having trouble with her PulsaCoil 3. She noticed that there was a leak coming from the unit and she was no longer getting hot water like she should be. An engineer headed out to the property to find the source of the leak. Upon arrival he completed a full inspection of the boiler. Unfortunately, he found that the leak was coming from the cylinder which had split. This meant her boiler was in quite a bad state of repair and had to be replaced instead with a new one. The engineer was able to temporarily fix the boiler until the new one could be installed.
Miss C chose the Fabdec ThermaCoil as her replacement option over the PulsaCoil PCS. The ThermaCoil is a far less complicated system and is therefore the one that we would recommend. It runs off of a single mechanical blending valve while the PulsaCoil contains a lot more components. This includes a Printed Circuit Board, Pump, Sensors and Relays for example. For the user of the system it is not too different. Regarding long term maintenance however, it is much simpler.
The installation was carried out in under three hours and the old unit was removed and ethically disposed of.
The new ThermaCoil comes with a 10 Year Manufacturers cylinder warranty, for further details visit www.thermacoil.co.uk
To contact The Plumbing Group to discuss your PulsaCoil 3 problem please either call us on 0800 02 365 92, or visit our contact us page and fill out our contact us form.