Leading Edge, Bristol, BS8 4UJ, PulsaCoil 3

We have created this Thermacoil Installation Case Study page to enable you to see before and after images of a typical installation. Leading Edge, Bristol, BS8 4UJ, PulsaCoil 3 Replacement Case Study features a residential development comprising 28 high quality one, two and three bedroom apartments that are located right opposite the A4 and the Bristol Marina. Mr E is one of many customers that have used our services in this location.

Leading Edge, Bristol, BS8 4UJ, PulsaCoil 3 Replacement Case Study

Mr E called The Plumbing Group Limited when he noticed that there was a leak coming from his PulsaCoil 3. Our engineers headed out to the flat as soon as possible to take a look at the boiler. After a full inspection it was found that the leak was coming from the cylinder itself due to a split. When this is the case the unit is deemed beyond economical repair and therefore has to be replaced. Luckily, the engineer was able to do a temporary fix so Mr E had some hot water while he waited for his new boiler.

Mr E decided to go for a Fabdec ThermaCoil as his replacement boiler. This was instead of a PulsaCoil PCS. The PulsaCoil contains many different components. For example, a Printed Circuit Board, Pump, Sensors and Relays. The ThermaCoil on the other hand runs off of a single mechanical blending valve. For the user of the system it is no different but for long term maintenance it is much simpler.

The installation was carried out in under three hours and the old unit was removed and ethically disposed of.

The new ThermaCoil comes with a 10 Year Manufacturers cylinder warranty, for further details visit www.thermacoil.co.uk

To contact The Plumbing Group to discuss your PulsaCoil 3 problem please either call us on 0800 02 365 92, or visit our contact us page and fill out our contact us form.