We have created this Thermacoil Installation Case Study page to enable you to see before and after images of a typical installation. Fountain House, London, SW8 2LJ, PulsaCoil 3 Replacement Case Study features a contemporary residential building in a highly sought after area in Central London. Mrs S is just one of the many customers that we work for in this building.
Fountain House, London, SW8 2LJ, PulsaCoil 3 Replacement Case Study
Mrs S contacted The Plumbing Group Limited when she discovered that her PulsaCoil 3 had stopped working. An engineer was sent out to the property as quickly as possible to take a look at the boiler. It didn’t take long to determine that the unit could no longer be repaired and instead had to be replaced. This was because the cylinder was split and leaking and therefore deemed beyond economical repair. The engineer managed to do a temporary repair until the new boiler could be installed.
Mrs S decided she would like to go for a Fabdec ThermaCoil as her replacement boiler. This is instead of the PulsaCoil PCS. We would recommend going for the ThermaCoil as it is a far less complicated system than the PulsaCoil. The PulsaCoil contains many different parts to it such as a Printed Circuit Board, a Pump, Sensors and Relays. This differs from the ThermaCoil which has replaced all of this for a single mechanical blending valve. For the user of the system it is no different but for long term maintenance it is much simpler.
The installation was carried out in under three hours and the old unit was removed and ethically disposed of.
The new ThermaCoil comes with a 10 Year Manufacturers cylinder warranty, for further details visit www.thermacoil.co.uk